Ryobi P2508 Manual Del Operador página 9

WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the bat-
tery pack from the product when assembling
parts.
CONNECTING THE POLES
See Figure 2.
 Insert the plug on the intermediate pole into the
socket on the handle pole and push together
until fully seated. The plug is larger on one side
and will only install one way.
THREADED
BASE
PLUG
ASSEMBLY
HANDLE
COLLAR
POLE
THREADED
BASE
 Lower the collar on the handle pole to the
threaded base on the intermediate pole and
rotate clockwise to secure.
 Repeat this process to attach the intermediate
pole to the cutting head pole.
NOTE: When assembled correctly, handle pole
and cutting head pole should not be able to sepa-
rate from intermediate pole when pulled. Repeat
above steps if poles can be separated from inter-
mediate pole.
WARNING:
Failure to securely assemble and lock all poles
together as directed above could cause the
poles to separate and could result in serious
personal injury or death.
CUTTING HEAD
POLE
9 — English
SOCKET
INTERMEDIATE POLE
Fig. 2