Information On 'FIeld-Adjustable Trip Points' And 'ADvanced Grid Features; Fcc / Rss Compliance - Fronius Primo 208-240 Serie Manual De Instrucciones

The solar inverter is designed exclusively to convert direct current from solar
modules into alternating current and feed this power into the public grid.
The following are deemed not to be in conformity with its intended purpose:
-
-
-
The manufacturer is not responsible for any damage resulting from improper use.
All warranty claims are considered void in such cases.
Proper use also means
-
-
-
When configuring the photovoltaic system, make sure that all photovoltaic sys-
tem components are operating completely within their permitted operating
range.
All measures recommended by the solar module manufacturer for maintaining
solar module properties must be followed.
Utility company regulations regarding grid power feed must be followed.
Information on
The inverter is equipped with 'Field adjustable trip points' and 'Advanced Grid
'Field-adjustable
Features'. For further information, please contact 'Fronius Technical Support' at
trip points' and the following email address: pv-support-usa@fronius.com.
'Advanced Grid
Features'
FCC / RSS Com- FCC
pliance This device corresponds to the limit values for a digital device of class B in ac-
cordance with Part 15 of the FCC regulations. The limit values should provide
adequate protection against harmful interference in homes. This device creates
and uses high frequency energy and can interfere with radio communications
when not used in accordance with the instructions. However, there is no guaran-
tee against interference occurring in a particular installation.
If this device interferes with radio or television reception when turning the device
on and off, it is recommended that the user solve this with one or more of the
following measures:
-
-
-
-
Industry Canada RSS
The device corresponds to the license-free Industry Canada RSS standards. Op-
eration is subject to the following conditions:
(1) The device may not cause harmful interference
(2) The device must accept any interference received, including interference that
may cause undesired operation.
utilization for any other purpose, or in any other manner
alterations to the inverter that are not expressly recommended by Fronius
installation of components that are not expressly recommended or sold by
Fronius.
carefully reading and obeying all the instructions and safety and danger no-
tices in the operating instructions
carrying out all the specified inspection and servicing work
installation as per operating instructions.
adjust or reposition the receiving antenna
increase the distance between the device and the receiver
connect the device to another circuit, which does not include the receiver
for further support, please contact the retailer or an experienced radio/TV
technician.
9