GET SMART SOS Guía Rápida página 10

C. INSTALLATION AND COMMISSIONING OF THE DEVICE
1.
Insert the battery taking care
not to damage the housing.
Test the device on the bike
and ensure it functions
correctly before installing it
permanently: start the bike
and place the device at the
point where it will be fitted,
pressing two fingers on the
sides of the display. Without
pressing the button and with
the engine idling, the device
will automatically turn on. You
can adjust the sensitivity of the
device using the app.
2.
Apply the device, wiping
the surface of the bike before
installation and affixing the
bi-adhesive only with the
temperature above 10°C/50°F.
It is advisable to reinforce the
installation of the device with
the two cable ties provided.
>10°
10
3.
Recommended positions
Underseat/Frame, in a protected
position from mud and bumps.
Steering yoke
Frame (away from heat sources
above 70°C/158°F)
EN