TCL Sweeva 100 Manual página 12

EN
◆
Method 2: Press the charging button on the remote control to return
Charging Base.
◆
Method 3:Press and hold the start button on the machine for 3 seconds to return it to the
charging base.
Turn off the main powers witch if Sweeva will not be used for along period of time.
To preserve the battery's lifespan, recharge at least once every 6 months.
How to start operating
1. Turn on: Turn on the rocker switch button at the bottom of the robot ( shift the gear to the " ON " state )
2. Start: Short press the " Start button "
3. Pause: When the robot is operating, short press the "start button"
and enter the standby mode.
4. Recharge: Press and hold the "Start button"
the button, robot vacuum will enter recharge mode, It will automatically find its way back to the charging
base.
5. Sleep: If there is no operation within 90 seconds, the status light will turn off and the robot will enter
sleep mode.
on the top of the robot to start the automatic cleaning mode.
for three seconds, Once the device beeps once, release
- 08 -
robot vacuum to the
on top, the robot will pause