Safety instructions
The user manual is part of the product and contains important
information for correct use.
• Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and pas-
sing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must be
protected against further use.
• Use product, product parts and accessories only in per-
fect condition.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentati-
on, contact your dealer or producer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Tripping hazard
Cables can be overlooked.
• Route the cable safely.
• Install the product and devices attached to it in a way that
persons cannot be injured, or objects cannot be damaged
for example by dropping or stumbling.
Product description
The product is a high-speed adapter cable for data trans-
fer from USB-C™ to DisplayPort. For example, you can transfer
films, photos and games directly from your smartphone to a
projector or HD TV.
Scope of delivery
USB-C™/DisplayPort adapter cable, User manual
Operating Elements
1 DisplayPort 1.2 plug
2 USB-C™ plug
Intended Use
We do not permit using the device in other ways like
described in chapter „Description and Function" or in
the „Safety Instructions". Use the product only in dry
interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and dama-
ges to persons and property.
Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensu-
re compatibility.
Article number
Connections
Data transmission rate
Resolution
Cable length
Weight
Colour
REV2021-09-08
Subject to change without notice.
V1.0aw
Model similar.
Connection and operation
1. Connect the USB-C™ plug to a device that has a USB-C™
connector.
2. Connect the DisplayPort 1.2 plug to a device that has a
DisplayPort connector.
The product does not contain any components to be ope-
rated during use.
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
Disposal Instructions - Product
According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contamina-
tive and hazardous substances can damage the health and
pollute the environment.
As a consumer, you are committed by law to dispose electrical
and electronic devices to the producer, the dealer, or public
collecting points at the end of the devices lifetime for free.
Particulars are regulated in national right. The symbol on the
product, in the user manual, or at the packaging alludes to
these terms. With this kind of waste separation, application,
and waste disposal of used devices you achieve an important
share to environmental protection.
WEEE No: 82898622
Disposal Instructions - Packaging
Packaging can be disposed of free of charge at the sui-
table collection points – paper belongs in paper bins,
plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
EU Declaration of Conformity
With the CE sign Clicktronic
mark of the Wentronic GmbH ensures, that the
product is conformed to the basic European
standards and directives.
Symbols used
For indoor use only
Recycling
44931
DisplayPort 1.2 plug, USB-C™ plug
Max. 21.6 Gbit/s
4K 3840x2160p @ 60 Hz
1 m
55 g
blue-grey
- 2 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
Material damage
®
, a registered trade-
IEC 60417- 5957
ISO 7001 - PI PF 066
®
by Wentronic GmbH