Replacing The Bulbs - Jocel JCEI60-014535 Manual De Instrucciones

REPLACING THE BULBS

There are 2 pieces of 1W LED bulbs on the cooker hood.
For replace the bulbs:
1. First of all, plug out the product, or turn off the power switch, or loosen or turn off the
safety fuse supplying the cooker hood to replace the bulb;
2. Slightly press on the connecting tabs existing on the cover of the LED bulb with a thin
tip screwdriver and push them downward. Hold the cover carefully not to let it drop
down when performing this operation. Slightly push the cover by aligning the tabs to
the cavities on bulb hole after the bulb is replaced. It is recommended that the new bulb
is fixed with cloth.
CAUTION!
if you need it, to be transported, firstly, disconnect the electricity of the cooker hood and
dismantle it. Carry it in its original box, if possible, and observe the transportation signs put
on the box. If you don't have the original box, make sure that the product is packed so that
it would protect from any damage.
30