Troubleshooting - Skil PWRCORE 12 AH6552A-00 Manual Del Propietário

TROUBLESHOOTING

Problem
Tool does not work.
LED worklight rapidly
flashes.
The LED worklight flashes
more slowly.
16
Cause
1. Battery pack is depleted.
2. Battery pack is not installed
properly.
3. Burned out switch.
Battery pack or tool and/or tool
are outside the recommended
temperature range.
The battery is at low-battery
capacity.
Remedy
1. Charge the battery.
2. Confirm that the battery is
locked and secured to the
tool.
3. Have the switch replaced
by an Authorized SKIL
Service Center or Service
Station.
Rest the tool and battery
pack for a while in room
temperature if they are too
cold or place the tool and
battery pack separately under
air flow to cool them if they
are too hot.
Recharge the battery pack.