Troubleshooting - Pioneer CT-L11 Manual De Instrucciones

Additional Information

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this

component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components

and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest

Pioneer authorized service center or your dealer to carry out repair work.

Problem

Can't record

Recordings are muddy or

distorted, or you can still hear

a previous recording under

the new one

Excessive tape hiss and over-

emphasized high frequencies

Dull, muffled sound

Recording made from the

VIDEO (AUX) input are

distorted

Recording made from the

VIDEO (AUX) input very quiet

Note

Static electricity or other external influences may cause

malfunctioning of this unit. In this case, unplug the

power cord and then plug back in. This will usually reset

the unit for proper operation. If this does not correct the

problem, please consult your nearest Pioneer service

center.

All manuals and user guides at all-guides.com

Remedy

• Check that the tape you want to record on still has the erase-protect tabs in place, or

that they are covered with tape, etc.

• Clean the tape heads.

• Make sure that Dolby NR is in the same position as when the tape was recorded.

• Set the VIDEO (AUX) input level to ATT ON.

• Set the VIDEO (AUX) input level to ATT OFF.

Tabla de Contenido