Wireless Manager; Wireless Manager Installation - Clevo P150HM 15CL37 Guia Del Usuario Concisa

Wireless Manager

With the 3.75G/HSPA module and USIM card (supplied
by your service provider) installed you may then install
the Wireless Manager application . The Wireless
Manager application allows you to directly access your
internet service from the computer.

Wireless Manager Installation

1. Make sure you enable power to the module by pressing
the Fn + key combination (the on-screen visual
indicator will indicate the module's power sta-
tus).
Note: If a Found New Hardware window appears,
click Cancel in all windows that appear, and then pro-
ceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 5.Install 3G Driver > Yes.
4. Click Next > Next > Install.
5. Click Finish.
6. Access the Wireless Manager application from the
Start menu or the desktop shortcut
Wireless Manager Application
The connection information is stored on the USIM
card supplied by the service provider (where this is not
the case you may need to create a profile - see the on-
line help).
The PIN number for your USIM card will be supplied
by your service provider. You usually have a limited
number of attempts to enter the correct PIN number.
1. Power on the 3.75G/HSPA module using the Fn +
combination.
2. Access the Wireless Manager application from the Start
menu (Start > All Programs > Wireless Manager > Wireless
Manager) or the desktop shortcut
3. You may be required to enter you PIN number and click OK.
4. Click the Connect
.
to be selected, and in most cases this will be pre-configured.).
5. The system will connect to your network.
6. Connected will appear above the timer icon (the timer will
indicate your connected time for the current session).
Concise User's Guide

PIN Number
.
button (A Profile needs
3.75G/HSPA Module (Option) - 29
key