Inseego FW2000e Guia De Instalacion página 11

Attaching the FW2000e to the pole mount bracket
1. Remove the installation handle and unplug the PoE cable from the PoE injector.
2. Attach a ground wire to the back of the device with the ground screw.
M5 10mm ground
screw / washer
3. Place the M6 external locking washers on the four M6 21mm bracket mount bolts.
M6 21mm bracket
mount bolt and washer
4. Attach the pole mount bracket to the FW2000e using a hex driver to tighten the
bolts to 2.0 Nm (1.48 ft/lb).
10