Ariston CARES PREMIUM EXT Instrucciones Técnicas De Instalación Y Mantenimiento página 130

technical area
GB
Turn the knob and select:
- Service option
(this mode can be used to store the ser-
vice centre data and maintenance noti-
ces).
Press the OK button.
Turn the knob and scroll through the pa-
rameters to be set:
- Service Center Data
- Enable service warnings
- Service warning reset
- Months remaining before service
Press the OK button to confi rm.
Press the back button "
turn to the previous visualisation.
Turn the knob and select:
- SERVICE
(if necessary, check or confi gure certain
essential parameters to ensure that the
system functions properly)
Press the OK button.
Turn the knob to scroll the list of sy-
stems displayed:
- Solar Controller (where present)
follow the instructions provided in the
solar heating system documentation
- Boiler
- Energy Manager (where present)
follow the instructions provided in the
heat pump system documentation
- Multi-zone control (where present)
follow the instructions provided in the
solar heating system documentation.
- ...
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob and select:
- Confi guration parameters
Press the OK button.
Turn the knob and scroll the parame-
ters:
90
- Gas parameter
- Visualization
- Boiler PCB Change
Press the OK button to confi rm.
Press the back button "
turn to the previous visualisation.
Turn the knob and select:
FAULTS
Press the OK button.
Turn the knob and scroll the parame-
ters:
- Solar Controller (where present)
follow the instructions provided in the
" twice to re- solar heating system documentation
- Boiler
- Energy Manager (where present)
follow the instructions provided in the
heat pump system documentation
- Multi-zone control (where present)
ffollow the instructions provided in the
solar heating system documentation.
- ...
Press the OK button.
Turn the knob and select the relevant
parameter.
Press the OK button.
Turn the knob to scroll on the display the
last 10 errors recorded.
" twice to re-