Cleaning Of The Tank For Powder And Granular - Efco AT900 Manual De Instrucciones

C
LEANING OF THE TANK FOR POWDER AND
The cleaning of the tank consists in removing any lumps from the bottom of
product in powder and / or granular; perform this operation at the end of each use
of the machine.
B
D
Picture 3 Powder and granular kit
Kit for treatments with powders and granulars
GRANULAR
Observing the picture 3:
C1
 Unscrew and remove the red
cap that closes the tank.
 Detach the hose C1 which is
connected to the exit junction on
the bottom of the tank.
 Detach the hose C from the
attachment of the tank.
 Detach the hose B from the
sleeve D, to avoid wetting the
felt inside, in case you use water
to clean the tank.
C
 Use a cloth to clean accurately
the inside of the tank and
remove any residual product.
 Reconnect the hose C1 to the
junction from which it was
removed earlier.
 Close the tank by tightening the
red cap.
 Reconnect the hose C to the
attachment of the tank.
 Reconnect the hose B to the
sleeve D.
29