Inspire Nashi NASHIBL21EU Instrucciones De Montaje, Utilización Y Mantenimiento página 27

7. REPAIR GUIDE
TROUBLE PROBABLE CAUSE
• Fuse or circuit breaker blown.
Fan will not
• Loose power line connections to the fan.
start
• Speed controller not in correct positon.
• Top canopy touching ceiling.
• Loose fan blades screws.
• Ceiling fan not secured against ceiling.
Le ventilateur
• Incorrect speed controller.
est bruyant
Mechanical noise
• Fan blades are not horizontal to ceiling.
• Blade screws are loose.
Fan wobbles
8. GUARANTEE
1. WARRANTY DURATION:
The general legal warranty applies to all products for 2 years from the delivery of the goods and upon providing the receipt as the
proof of the purchase.
However, INSPIRE goes beyond that. We want you to have the best experience possible with our products, thus we have extended
the warranty periods for all INSPIRE products to 8 years.
2. WARRANTY APPLICATION:
For the warranty to be applied, the product must have been installed, used and maintained according to the Instruction Manual
guidelines.
3. QUESTIONS AND CLAIMS:
If you have any questions or encounter any problems regarding the use of the product, its performance or visual aspect, you are
welcome to contact your vendor through the contact information you will find on the purchasing receipt.
9. OTHERS (SERVICE, REPAIRING, ETC.)
Have your product repaired by a qualified person.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare parts, otherwise This may result in considerable
danger to the user.
Please contact the store which you bought the product for after sale services if any question.
Please contact the store which you bought the product if you lost the installation manual.
SUGGEST REMEDY
• Check main and branch circuit fuses or circuit
breakers.
• Check line wire connections to fan.
• Check speed controller's position.
• Lower canopy form ceiling to ensure minimum
3mm clearance.
• Re-tighten all screws on fan blades but never
over-tighten.
• Re-tighten all screws in the hanging bracket or
plate.
• Change the controller to one supplied.
• Allow at least for 8 hours setting-in period.
• Measure from ceiling to tips of baldes,then rotate
fan so all blades are checked for equal height
from ceiling(not adjustments may be made by
slight pressure up or down on blade holders).
• Make sure all screws are securely fastened.
FR
ES
PT
IT
EL
PL
RO
EN
27