Publicidad
Idiomas disponibles
Idiomas disponibles
4. The appliance can also be started by pressing the high
speed button (turbo button). The blender will operate at
maximum speed at any time. In this case, the speed will not
change even if the control dial is turned.
5. To stop the blender, release the high speed button or the
low speed button.
Mincer instructions
The maximum time of continuous use must not exceed 1
minute. A break of 3 minutes is necessary between two
consecutive periods of use.
1. Place the mincer bowl on a clean, flat surface.
2. Place the stainless steel blade in the mincer bowl, as
EN
shown in Fig. 1.
3. Place the food in the bowl.
Note: remove the bones from the meat, cut it into small
pieces and then place it in the bowl. The maximum quantity
of meat cannot exceed 200 grams per use.
4. Close the lid of the bowl, check that the tube of the bowl
inside wall is aligned with the groove in the lid, then close the
lid, turning it in a clockwise direction until it is fully-tightened
(Fig. 2). To remove the lid, turn it in the opposite direction.
5. Insert the motor compartment into the hole of the mincer
lid and turn it in a clockwise direction (Fig.3).
47
Publicidad
