Operation / Load Handling; Vacuum Operation - probst AIRLIFT ALX-120 Instrucciones De Uso

Operation / load handling

5 Operation / load handling
5.1

Vacuum operation

•
Inspect the vacuum unit and accessories for signs of damage before each use.
•
Connect the extension cable to the mains cable of the vacuum generator using the supplied strain relief, which is
attached to the vacuum generator (backpack suction cup). (Fig. 1/ Fig. 2)
•
Put on the vacuum generator (backpack suction cup) and adjust the backpack harness.
•
Attach the suction hose to the carrying handle and tighten the hose clamp supplied.
(see fig. 3 / fig. 4).
•
Connect the extension cable to an FI socket (with FI circuit breaker).
•
To switch on the vacuum generator, move the mains switch to the "I" position (Fig. 5 / Fig. 6).
•
To switch off the vacuum generator, move the mains switch to the "0" position (Fig. 5 / Fig. 6).
Fig. 1
Fig. 2
52600018
Fig. 3
Fig. 4
13 / 17
Fig. 5
Fig. 6
GB