Descargar Imprimir esta página

Machine Elements; For Your Safety; Intended Use; Noise/Vibration Information - Bosch HF 0 602 211 Serie Manual

Ocultar thumbs Ver también para HF 0 602 211 Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
All manuals and user guides at all-guides.com
EURO • Printed in Germany • BA 3 609 929 002 • HF/GGS 2 211-43 • GB • OSW 07/99
HF/GGS (002)-book Seite 9 Montag, 5. Juli 1999 10:21 10

Machine Elements

1 Protective guard
2 Support strip
3 Rubber stopper
4 On/Off switch
5 Ventilation slots
6 Grinder spindle
7 Open-ended spanner
8 Mounting flange
9 Clamping nut
10 Two-hole spanner for clamping nut
Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended for grinding and deburr-
ing of metal with corundum grinding tools.

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the tool is (A) dB (A).
The noise level when working can exceed
85 dB (A).
Wear ear protection!
The weighted acceleration is typically (B) m/s
Type
2 211 ...
2 212
2 213 104
2 239 104, 2 239 107
2 239 134
2 240 034, 2 240 035
2 240 104, 2 240 107
2 240 134
2 242 101, 2 242 104, 2 242 107 77
2 242 134
2 242 436
2 242 134
GB
The machine must be operated only with the
associated protective devices.
Insert the mains plug only when the machine is
switched off.
2
.
Always direct the cable to the rear away from
the machine.
(A)
(B)
Clamp the workpiece in case it does not remain
76
6
stationary from its own weight.
81
6
Do not work with materials containing asbes-
79
6
tos.
79
6
Use only grinding tools whose allowable speed
is at least as high as the no-load speed of the
82
6
machine.
83
6
Observe the instructions of the manufacturer
79
6
for the mounting and use of grinding tools.
82
6
Pay attention to the dimensions of the grinding
6
disc. The mounting hole diameter must fit the
mounting flange 8 without play. Do not use re-
80
6
ducer pieces or adapters.
82
6
Protect the grinding tool from impact, shock
80
6
and grease.
Keep hands away from rotating grinding tools.

For Your Safety

Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions
contained
therein
strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be fol-
lowed. Before using for the first
time, ask for a practical demon-
stration.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Wear protective glasses, hearing
protection and a dust protection
mask.
When necessary, also wear an
apron.
Wear protective gloves and sturdy
shoes.
When working with the machine, al-
ways hold it firmly with both hands
and provide for a secure stance.
are
9

Publicidad

loading