Proline CBE15 Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
BEFORE USING YOUR COFFEE MAKER FOR THE FIRST TIME
Make sure the coffee maker is switched off.
1. Open the water tank cover.
2. Fill the tank with fresh water. DO NOT USE COFFEE.
3. Close the tank cover securely in order for the brew cycle to begin.
4. Insert the mains plug into the wall socket and switch the appliance on by pressing the ON
button. The red indicator light comes on. The drip coffee section will start to work.
5. Press ON/OFF for espresso coffee section, the yellow indicator light comes on. Press the
pump control button, the water flows out.
6. Switch the appliance off when all the water is in the carafe.
7. Let the appliance cool down for about 5 minutes. Repeat the process 2 or 3 more time for
a perfect taste.
MAKING DRIP COFFEE
1. Place the appliance on dry, level and heat-resistant surface, away from any edge.
2. Remove the carafe from the appliance and set aside. Open the tank cover to fill with fresh,
cold water.
The markings on the gauge indicate level of water required to brew the desired
number of cups.
To avoid overflow, do not fill the reservoir past the Max line.
3. Open the top cover to place the filter holder into the filter holder support, making sure it's
assembled correctly.
4. Put the nylon filter into the filter holder. Add desired amount of ground coffee into the filter.
We recommend one level measuring spoon of ground coffee for a cup of coffee.
5. Close the top cover.
6. Slide the carafe into the appliance ensuring it sits correctly on the warming plate.
7. Plug the appliance into the wall socket. "12:00" will appear on the display.
8. Press ON/OFF on the control panel to immediately start the brewing.
The yellow indicator light comes on to indicate the appliance is ON.
When brewing is complete, you can remove the carafe from the appliance.
To keep coffee hot, return the carafe to the warming plate after serving.
9. Switch the appliance off by pressing ON/OFF after use. The yellow indicator light goes off.
10. If you want to brew more coffee, let the appliance cool down for at least 5 minutes before
you start brewing coffee again.
DELAY BREWING
You can delay brewing by operating the following procedures.
1. In standby mode, press PROG to set the clock time. "CLOCK" will
show on the display.
2. Press HOUR repeatedly to set the hour.
3. Press MIN repeatedly to set the minutes.
4. Press PROG to set the timer. "TIMER" will show on the display.
5