Loudness; Reset Function; Radio Operation; Switching To Radio Mode - Blaupunkt MANCHESTER 110 Instrucciones De Manejo

OPERATION

LOUDNESS

Press and hold the EQ button for 2 seconds
to activate the LOUD function. Press and
hold it again to cancel the function.
DISPLAYING INFORMATION
Press the DISP button (7) to show the time
for 5 seconds. Afterwards, it shows the
information again.
SETTING THE TIME
Press and hold the DISP button for 2
seconds. The hour indicators are flashing.
Briefly press the
correct hour. Briefly press the DISP button
to change to minutes. Use the
button again to set the correct minute.
Afterwards, press the SEL button to
confirm.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (10).

RESET FUNCTION

The RESET button (25) must be activated
with either a ballpoint pen or pointed metal
object.
The RESET button is activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If the RESET button (25) is pressed
and the unit does not work, please use a
cotton swab moistened with isopropyl
alcohol to clean the socket on the front
panel.
/ button to set the
/

RADIO OPERATION

SWITCHING TO RADIO MODE

Press the SRC button (1) to select radio
mode, which appears in the display
together with the memory bank and
frequency.
SELECTING
BAND
In radio mode, press the BAND button
(13) to select the desired band.
The reception band changes in the
following order:
→FM1→ FM2→ FM3 → MW1(AM1)→ MW2(AM2)

SELECTING A STATION

Press the
button (6) briefly to activate automatic
seek function. It automatically searches
up/down for a station. Press it for 2
seconds until "MANUAL" appears on
the display, to select the manual tuning
mode. In this
incrementally scan frequencies up or
down until a station has been located. If
both buttons have not been pressed for
5 seconds, it will return to seek tuning
mode and "AUTO" appears on the
display.
8
THE FREQUENCY
button (11) or
mode, you can
E
N
G
L
I
S
H