HELPFUL HINTS
•
Do not put any fruit or vegetables in your machine until power is turned on.
•
Allow unit to run for at least 10 seconds before juicing.
•
Do not force food into the juicer. Allow food to pass through slowly and steadily using the pusher.
You do not need to apply pressure unless the juicer starts to vibrate. Then only a slightly harder
push should bring it back to balance.
•
Any fruit or vegetable that will fit the chute can be put through whole. The only time it is necessary to
cut is when something is too large. Then it should be cut into large enough piece to fit in the chute.
Do not cut pieces too small.
•
Remove large pits such as peach, mango, etc. as they will damage the blade and possibly the unit.
•
Cleaning can be made easy by placing a plastic bag can be lifted out and disposed of easily leaving
the pulp collector easier to clean.
•
Let the juice extractor run for a few minutes before turning off to allow any excess juice to be
extracted from the pulp. Once turned off it is quite normal for the juicer to spin for a minute or so due
to the very fine precision balancing of this appliance. Wait until it is done spinning before
disassembling.
•
Do not use bananas or avocados as they do not contain juice and will clog machine. Add them
separately in a blender.
•
We do not recommend using overripe fruit as it will leave too much pulp in the filter and clog the
machine.
•
Do not pour liquids into the machine at
any time.
P-4
All manuals and user guides at all-guides.com
DESCRIPTION
P-5