Moving The Appliance; Electrical Or Electronic Product At End Of Service Life; Troubleshooting And Corrective Actions - Krups EA69 Serie Manual

01_IFU-KR_COFFEEMAKER_EA6910_EN_Mise en page 1 28/05/10 14:49 Page15
KRUPS
SERIE EA69xx
! Caution! : Cleaning tray, Drip tray and its grid, Coffee grounds collector and its front part
and the water tank are not designed to go into the dishwasher.
11

MOVING THE APPLIANCE

Keep the packing and use it again to move the appliance.
n
!
Caution! : If the unpacked appliance is dropped, it is advisable to have it inspected by an authorised
Service Dealer.
12

ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE

Let's all help protect the environment !

Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.
13
TROUBLESHOOTING, CORRECTIVE ACTIONS
The appliance does not turn on
after I press the button.
Water or steam are coming out of
the steam nozzle unexpectedly.
The espresso or coffee is not hot
enough.
The coffee is too weak or not
strong enough.
The coffee flows too slowly.
The coffee is not creamy enough.
15
All manuals and user guides at all-guides.com
Check that the power supply cord plug is correctly inserted in the socket.
If used often, some drops of water may run out of the steam nozzle.
Change the coffee temperature setting.
Heat the cups by rinsing them under hot water.
Check that the coffee bean compartment contains coffee and that it is running
through properly.
Avoid using oily, caramelised or flavoured coffee beans.
Reduce the volume you have selected using the knob.
Select the button.
Turn the fineness of grind button to the left to obtain a finer grind.
Make your coffee in two separate cycles by using the 2 cup function.
Turn the fineness of grind button to the right to obtain a coarser grind (may de-
pend on the kind of coffee being used).
Carry out one or more rinsing cycles.
Turn the grinding fineness knob towards the left for a finer grind (may depend
on the type of coffee used).
Change the Claris Aqua Filter System cartridge (follow the installation procedure
on page 4).
Carry out one or two rinsing cycles.