Recording And Downloading The Data - Grant XUB Serie Manual Del Usuario

Recording and downloading the data

System Requirements:
-
Windows 2000 SP4; XP SP2
-
Mac OS 10.1.2+
- USB High Speed Hub Port (500mA)
-
One available USB port
To record the saved data:
Always ensure the MC card is inserted into the Grant digital ultrasonic bath prior to
turning the power on.
The MC card will save the cycle results of each cycle until the card is removed.
Once you are ready to download the information, remove the MC card. Insert it into
the MC card reader provided and plug the card reader into the USB port of the PC.
There is a file on the MC card which is already set up to provide a template for
recording the data – cycles.csv. Open this file and the data will display in spreadsheet
format.
The file will show information of every cycle run while the MC card has been in place
in the Grant digital ultrasonic bath.
To ensure that the next cycle information is recorded on the MC card, switch off the
Grant digital ultrasonic bath and reinsert the MC card before switching the bath on
again.
The data will only be saved to the MC card, if it is inserted before the machine is
switched on. If the MC card is inserted when the Grant digital ultrasonic bath is
already switched on, the data will not be recorded.
XUB Series
Operating Manual
23
EN
32925 V1