RH418NTE, RH418NTEG
• Blue button (4): Medium inside temperature
With each press of the buttons on the remote control, the cooling temperature
switches between the possible values. By pressing a button, a red LED illuminates on
the remote control.
I
NOTE
8
The red LED illuminates as soon as a signal has been sent out. Check the
batteries if the LED does not illuminate.
1. Remove the plastic insulation from the battery holder before initial use.
2. Align the upper side of the remote control to the LEDs of the interior light
(fig. 1 2, page 3). Maintain a distance of approx. 10 cm.
3. Press the desired button:
Button
(fig. 2 page 3)
(2)
Black button
Yellow button
(4)
Blue button
6.5
Using the minibar
A
NOTICE! Damage hazard
Only store heavy objects such as bottles or cans on the bottom of the
minibar.
6.6
Locking the door (optional)
➤ Turn the key a quarter turn to the left to lock the cooling device (fig. g, page 9).
6.7
Switching off
1. If you wish to switch the cooling device off, pull out the connection cable.
2. Clean the interior to make sure it is dry enough.
EN
Inside temperature
Press once: Low level
Press twice: Lowest level (maxi-
mum performance)
(3)
High level (minimum perfor-
mance)
Medium level
Operation
LED signal
The LEDs of the interior light
flash at high speed.
The LEDs of the interior light
flash at low speed.
The LEDs of the interior light
flash at medium speed.
19