Increase Spring Tension; Hose Replacement Instructions - Ebinger R3 Manual De Instrucciones

DE EN

3. Increase spring tension

Attention: Before attempting any maintenance disconnect and turn of supply line, then release the line
pressure. The hose must always be completely wound up.
fig. 1 - remove screws

4. Hose replacement instructions

Attention: Before attempting any maintenance disconnect and turn of supply line, then release the line
pressure. The hose must always be completely wound up.
fig1. - pull out hose
and latch
fig. 5 - remove
cable tie
fig. 9 - attache
hose to the swivel
fig. 13 - fit screws
FR ES
fig. 2 - add 2 complete
turns. 1 click on hub
equals 90°
fig. 2 - remove
screws
fig. 6 - remove swivel
fig. 10 - fit swivel
fig. 14 - fit screws
IT
fig. 3 - remove
screws
fig. 7 - remove
hose
fig. 11 - fit cable tie
fig. 15 - recoil hose
evenly into reel
12
fig. 3 - replace screws
fig. 4 - Remove side
plate
fig. 8 - fit hose
fig. 12 - fit side plate