Teka RVU 20046 GBK Manual Del Usuario página 33


How to change the door opening
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit comes
with the unit (in the box), should you wish to reverse the hinge on your unit.
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. Open the door to a 90 degrees angle, take out the 2 screws (2) from lower door axis (3), remove the door
(4), Remove the axis plate (3) from the door, (Fig. A).
2. Unscrew the screw (11) located underneath the door frame and the limit device (10), and relocate it at
left end side of the door frame. (Fig. A/B)
3. Take out the 3 hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top of
cabinet with 3 screws. (Fig. D)
5. Following the above procedure, install the spare lower hinge to the left (9). (Fig. E)
6. Install and aligned the door.
7. Insert the plastic caps to cover the holes(8).
2 . Screws
5. Top hinge (Right)
8. Hole cover
11. Screw
31
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)