Troubleshooting - BSVILLAGE SP 3600 Manual Del Usuario

EN
parts and relevant documentation".
For regular control:
• Check that the mechanical parts are tightly se-
cured and check the condition of the screws sup
porting the product.
• Check that the power cord and isolating parts are
in their correct position, are secure and in a good
state of repair.
• Check the temperature of the product and the
electric motor. In the event of a fault, stop the
product immediately and contact specialised
technicians.
• Check for product vibrations. In the event of a
fault, stop the machine immediately and contact
specialised technicians.
7.1. Routine maintenance.
To be performed at least once a year, or more fre-
quently if necessary.

8. Troubleshooting.

PROBLEMA
1. The product
does not work.
2. Power cord damaged.
3. Plastic components
damaged.
4. Low flowrate from
outlet.
22
POSSIBILE CAUSA
No or insufficient
power supply.
The power plug
is not correctly in-
serted in the power
outlet.
The vent is clogged
by dirt, Fig. 17.
Hydraulic compo-
nents clogged or
bent.
Wear and/or negli-
gence.
Wear.
The product is dirty
Hydraulic compo-
nents clogged or
bent.
The impeller's
blades are worn out.
The product is not
trimmer correctly.
MANUALE_SP3600_BWT-A5 - Rev: 01/2020
Product components that, due to their normal use,
suffer wear and/or tear must be regularly replaced to
ensure good product performance. The following ta-
ble shows the perishables and/or consumables used
in the product and their estimated working life.
O rings and
general seals
Mechanical seal
7.2. Extraordinary maintenance.
Extraordinary product maintenance must be per
formed by a specialised technicians.
This consists in replacing worn or damaged parts
(power cord, bearing, rotor, impeller, etc.).
1° SOLUTION
Check the power
supply.
Firmly insert the pow-
er plug in the power
outlet.
Clean the vent.
Clean and adjust
hydraulic components.
Contact specialised technicians.
Replace.
Clean the product.
Clean and adjust hy-
draulic components.
Replace the impeller.
Trime the product like
illustrated in Fig. 16.
1 year
TAB. 6
2° SOLUTION
Contact special-
ised technicians.
Contact special-
ised technicians.
Contact special-
ised technicians.