Maintenance/Cleaning; Troubleshooting - LIVARNO LUX LSLB 100 A1 Manual De Instrucciones E Indicaciones De Seguridad

8. Maintenance/cleaning

Maintenance
The LED emitter (1) does not contain any parts that require maintenance. The LED lamp cannot be
replaced.
Cleaning
DANGER! The mains power must be switched off for all work on the LED emitter (1), even
cleaning! Otherwise there is a risk of electric shock!
DANGER! Make sure that no liquid can penetrate the housing of the LED emitter (1).
Otherwise there is a risk of electric shock.
To clean the LED emitter (1), use a dry cloth. Never use any solvents or cleaners that could damage the
plastic housing. For more stubborn dirt, use a slightly damp cloth.

9. Troubleshooting

The light does not come on
 The movement sensor (2) is not aimed correctly. Correct the positioning.
 The electrical connection is faulty. Get the electrical connection checked by an electrician.
The light switches on and off quickly
 There is interference to the sensor from other light sources or bright reflective surfaces. Remove the
external light source or reflective surface.
The light does not switch off
 There are people or moving objects in the detection range of the movement sensor (2). Remove them.
 The LED emitter (1) is moving in the wind, which is constantly triggering the movement sensor (2).
Always secure the LED emitter (1) to a stable mounting point.
LIVARNO LUX LSLB 100 A1
English - 31