Other Features - Beko BEHPGH 090 Manual Del Usuario

Ocultar thumbs Ver también para BEHPGH 090:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2
Unit specifications and features
Note: Room relative humidity less
than 80%. If the air conditioner
operates in excess of this figure,
C
the surface of the air conditioner
may attract condensation. Please
sets the vertical air flow louver to
its maximum angle (vertically to the
floor), and set HIGH fan mode.
To further optimize the performance of your
unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and
TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
A guide on using the infrared remote is not
included in this literature package. Not all the
functions are available for the air conditioner,
please check the indoor display and remote
control of the unit you purchased.
2.5

Other features

• Auto-restart (some units)
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
• Wireless control (some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
Split type air conditioner / User Manual
For the USB device access, replacement,
maintenance operations must be carried out by
professional staff.
• Louver angle memory (some units)
When turning on your unit, the louver will
automatically resume its former angle.
• GoClean function (some units)
- The GoClean Technology washes away dust
when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A "pi-pi" sound will be heard. The
operation is used to produce more condensed
water to improve the cleaning effect, and the
cold air will blow out. After cleaning, the internal
wind wheel then keeps operating with hot air to
blow-dry the evaporator, thus keeping the inside
clean.
- When this function is turned on, the indoor unit
display window appears "CL", after finish whole
process, the unit will turn off automatically and
cancel GoClean function.
- For some units, the system will start high-
temperature cleaning process, and the
temperature of air outlet is very high. Please
keep away from it. And this would lead to the
rising of the room temperature.
• Breeze away (some units)
This feature avoids direct air flow blowing on
the body and make you feel indulging in silky
coolness.
• Refrigerant leakage detection (some units)
The indoor unit will automatically display
"ELOC"or flash LEDS (model dependent) when
it detects refrigerant leakage. Please call service
for this defective.
17 / 324 EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido