Troubleshooting - Tecnimoem Powerlift Up2 Manual De Uso

7.- TROUBLESHOOTING

PROBLEM
The actuator is not
working
The battery will not
charge
The actuator stops
Noisy hinges
The wheels do not
rotate or brake
properly
CAUSE
The red emergency
activated
The battery is connected to the
electricity mains for recharging
The battery is low
The battery is not property
connected
Control or motor cables wrong
connected
Hand control and/or actuator
failure
Mains failure
Malfunctioning battery
charging base
Hoist overloaded
The battery is low
Lubrication is requires
Dirty
stop is Turn the red button clokwise to
reactivate
Unplug the black power supply
Recharge the battery
Remove the battery and replace it
Insert the cables correctly to the bottom
Replace the hand control and/or the
actuator
Check mains supply
and/or Replace the battery and/or the charging
base
Reduce the load and wait a few minutes
Recharge the battery
Apply lubricant to the hinges
Clean the wheels
ENGLISH
REMEDY
23