Sleep Mode - npe WASP-N Guia De Inicio Rapido

TITLE: Getting Started with WASP-N
DATE:
1. A double flash signals the WASP-N is joining an existing Wi-Fi network.
Note: While the WASP-N is joining the network, the red LED flashes fast. While it is
flashing a tap of the black button causes the WASP-N to stop joining the network and
proceed to create its own network.
2. A single flash indicates a limited AP Wi-Fi network has been created.
Status Indicators of Red LED
These status indicators are provided in Limited AP and Infrastructure Modes only. They are
in priority order. Indicators earlier in the list override indicators lower down.
Name
Network Join Indicator
Charging Indicator
Battery Indicator

SLEEP MODE

The WASP-N is in the Sleep Mode when both LEDs are off. In this state both the Wi-Fi and
ANT/BLE radios are powered off and the WASP-N consumes a minimal amount of power.
To enter Sleep Mode from any Operational Mode (Limited AP, Infrastructure, or WPS),
press and hold the button until three slow blinks occur simultaneously on both LEDs.
When the WASP-N is off, it is waiting for either a button press or USB connection. If the
button is pressed and held for at least three quarters of a second, the WASP-N will wake up
and enter the WASP-N Startup sequence. When the USB cable is connected the WASP-N
will power up and start the power up sequence.
When the WASP-N unit is powered off with the USB Cable connected the WASP-N enters
Charging Sleep Mode. This mode is functionally equivalent to Sleep Mode as far as button
operations are concerned. A button press will wake up the WASP-N and it will enter the
startup sequence, but it will continue to charge from the USB port.
All manuals and user guides at all-guides.com
© North Pole Engineering, Inc. 2019
10/7/2019
Description
Rapid blink on red LED. Provided in Infrastructure Mode only.
Occurs while searching for or negotiating a network connection.
If the LED is rapidly flashing for a WASP-N that was previously connected
in Infrastructure Mode, that's a sign network connectivity was lost.
Provided if USB cable is connected.
• Slow blink indicates battery is charging.
• Solid indicates battery is fully charged.
One to four blinks indicating battery level.
Four blinks is the highest.
...
One blink is the lowest level.
Battery indication is provided by tapping the button.
Battery Indication is not provided if the Charging or Network Join Indicator is active.
Page 2 of 42
Quick Start Guide
Revision: 1.6
PAGE: 2 of 42