ENT-ACC14 Four Hook Adapter
This accessory is attached to the syringe pump holder at right angles to the fixed hooks.
Installation
1. Remove all equipment from the syringe pump holder.
2. Position the accessory (3) in the slots on top of the fixed hook moulding, then push it down as
far as it will go (4).
The maximum Safe Working Load is the same as for the fixed hooks (2 kg per hook).
Make sure the accessory hooks are securely fitted on the syringe pump holder before
use
Cleaning
For decontamination instructions, refer to the bed instructions for use.
Product Weight
Maintenance
For maintenance instructions, refer to the bed instructions for use.
End of Life Disposal
Components that are primarily be made up of different kinds of metal (containing more than 90%
metal by weight) for example sling bars, rails, upright supports, etc., should be recycled as
metals.
Symbol explanation
Indicates the product is a Medical Device according to
EU Medical Device Regulation 2017/745
CE marking indicating conformity with European Community harmonised
legislation
Mandatory to read the Instructions for Use
3
WARNING
1.7kg
EN
4