- The maximum manual watering time for each
station is 240 minutes.
- Manual watering does not work without electrical
power.
• OFF: when the dial is turned to this position, Figure 9 will be
displayed. Figure 9 and the current time will alternate every two
seconds. In OFF mode, both the areas and the other functions will
be OFF , and there will be no watering.
figure 4
figure 8
05. LOW BATTERY INDICATOR:
If the dial is in the OFF position and the battery symbol is
displayed as in figure 10, it is time to change the batteries. Once
they have been replaced with new ones, the low battery indicator
will disappear.
figure 7
figure 9
figure 10
06. CHOOSING A WATERING SCHEDULE:
• Turn the dial to establish the setting or to read the previously-
entered setting.
• Previous settings are saved when the dial is turned to another
position.
07. SETTING DATE AND TIME:
• Turn the dial to SET CLOCK. The screen will display what is
shown in figure 12, and the time will start flashing.
• Set the time by pressing the + or - button.
• Save the data by pressing the ENTER button, then set the
year.
• Select the year by pressing the + or - button.
• Confirm the year by pressing the ENTER button. Now it is
time to set the month.
• Select the month by pressing the + or - button.
• Confirm the month by pressing the ENTER button. Now it is
time to set the day.
• Select the day by pressing the + or - button.
• Confirm the day by pressing the ENTER button.
• The setting is saved by turning the dial to any other position..
NOTE: Numbers can be increased or decreased faster by
holding down the + or - button.
figure 12