Setting Watering Start Time; Setting Watering Duration; Setting Watering Frequency - Aqua Control C1114 Manual Del Usuario

8. SETTING WATERING START TIME:

• Turn the dial to the START TIME position (figure 15)..
• Press the PROG A/B button and select the schedule.
• Press the > button to select the desired watering start time
from the four available options.
• Press the + or - button to select the watering start time (figure
16).
• Press the > button and repeat the above steps to set the
four possible start times for the initially selected watering
schedule.
NOTE:
- Hold down the + or - button and numbers will increase or
decrease faster.
- To clear the watering start times, press the CLEAR button and
figure 15 will be displayed.
figure 15
figure 16
figure 15

9. SETTING WATERING DURATION:

• Turn the dial to the HOW LONG position, and figure 17 will
be displayed.
• Press the PROG A/B button to select the desired schedule
and set its watering duration.
• Press the > or < button to select the watering area.
• Press the + or - button, and the duration time will flash as in
figure 18. Use the + or - button to set the watering duration.
• Repeat the above steps to set the watering time for the other
areas.
NOTE:
- Hold down the + or - button and numbers will increase or
decrease faster.
- The maximum watering duration is 240 minutes.
- When the display indicator shows ---, it means that the area
will not be watered.
figure 17

10. SETTING WATERING FREQUENCY:

Watering frequency can be set in three different ways. Day or
days per week, every x days (1-32 days) or odd or even days.
1. Day or days per week:
• Turn the dial to HOW OFTEN. Figure 19 will be
displayed.
• Press the PROG A/B button to select the schedule.
• Press > or < to choose the day of the week – which will
flash –, then press the + button to confirm the day. The
day will be displayed inside a box on the screen, which
means that day has been confirmed. Use the - button
to cancel a previously-programmed day. The day of
figure 18