Safety Warnings For Impact Wrenches; Product Description And Specifications - stayer IS L20 Manual De Instrucciones

gb
- Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
1.5 Battery tool use and care
- Recharge only with the charger specified by the
manu-facturer. A charger that is suitable for one type
of bat-tery pack may create a risk of fire when used with
another battery pack.
- Use power tools only with specifically designated
bat-tery packs. Use of any other battery packs may
create a risk of injury and fire.
- When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
- Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
oc-curs, flush with water. If liquid contacts eyes,
addi-tionally seek medical help. Liquid ejected from
the bat-tery may cause irritation or burns.
- Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
- Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
- Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
1.6 Service
- Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
- Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.

1.7 Safety Warnings for Impact Wrenches

- Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
- Hold the power tool securely. When tightening and
loosening screws be prepared for temporarily high
torque reactions.
- Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
- Always wait until the power tool has come to a com-
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
ENGLISH
16
- In case of damage and improper use of the battery,
va-pours may be emitted. The battery can set alight
or ex-plode. Ensure the area is well ventilated and seek
medical attention should you experience any adverse
effects. The vapours may irritate the respiratory system.
- Do not open the battery. There is a risk of short-circuit-
ing.
- The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit may occur, causing
the battery to burn, smoke, explode or overheat.
- Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, water and
moisture. There is a risk of explosion.

2. Product Description and Specifications

Read all the safety and general instructions.
Failure to observe the safety and general
instructions may result in electric shock, fire and/
or serious injury.
Please observe the illustrations at the beginning of
this oper-ating manual.
Intended Use
The machine is intended for driving in and loosening
screws and bolts as well as for tightening and loosening
nuts within the respective range of dimension.
Product features
The numbering of the product features refers to the
diagram of the power tool on the graphics page.
Functions desciption (Fig.1)
(1) Tool holder
(2) On / off switch
(3) Speed selector (3 positions)
(4) Speed indicator LEDs (x3 LEDs)
(5) LED illumination of the work area
(6) Battery release key
(7) Battery
(8) Belt clip lock
(9) Insulating handle
(10) Direction of rotation selector
Functions desciption (Fig.2)
(1) Screwdriver bit
(2) Tool holder
(3) Locking sleeve
(4) Bulb
(5) Battery
(6) Handle
(7) On/Off switch
(8) Rotational direction switch
(9) Battery unlocking button
(10) Battery charge-control indicator
(11) Charger
(12) Universal bit holder
16