Appliance Overview; Using The Appliance - MPM MGJ-01M Instrucciones De Funcionamiento

 Do not take the egg boiler without water into operation!
 Only take hold of hood and egg holder at their handles.
 WARNING! Hot steam escapes from the steam opening and when
opening the hood! Risk of scalding!
 WARNING! Handle the measuring cup cautiously. It contains the egg
piercer at the bottom. Risk of injury!
 The appliance should be connected into the socket with grounding pin.
WARNING! Hot surface!

APPLIANCE OVERVIEW

1.
Base unit
2.
Backlit on/off switch
3.
Stainless steel heater shield / water
fill port
4.
Removable egg tray (for 7 eggs)
5.
Egg tray handle
6.
Stainless steel lid
7.
Lid handle
8.
Steam vent
9.
Water measuring cup
10. Egg piercer
BEFORE FIRST USE
1. Unpack the appliance
from the original card-
board box. Remove all
stickers, bands, trans-
port safety locks, and
inserts/spacers.
2. Clean the appliance as
instructed in Section
"CLEANING AND MAIN-
TENANCE".
3. Place the appliance on a level, firm and dry surface.

USING THE APPLIANCE

1. Place the egg tray (4) on the heater shield (3) so that the round edge of the heater shield (3)
snugly enters the egg tray (4).
2. Depending on the number of eggs to be cooked and the doneness, measure enough cold
water with the measuring cup and pour it on the heater shield (3). You may cook 1 to 7 eggs
8
6
5
9
2
10
8
7
4
3
1