Compatibility Table - Phottix Indra500 TTL Manual De Instrucciones

High Speed Sync – HSS/Auto FP
High Speed Sync (HSS) mode is used to shoot at shutter speeds higher than a
camera's set flash sync speed (typically 1/200-1/250s). This is useful when using
aperture priority mode and in limiting ambient light. HSS results may vary with
different camera models – refer to your camera user manual for more details.
Please note:
1. HSS function is supported by the Phottix Indra500 TTL Studio Light, but it
cannot be set on the studio light itself.
2. The camera, flash trigger and receiving mode can greatly affect HSS mode.
For best results in HSS mode please use recommended Phottix flash triggers.
Please see the "Compatibility Table" below and refer to your flash trigger and
camera user manuals for more details.
3. HSS function will not work in Manual and Multi Stroboscopic mode.
4. Use the HSS mode frequently will shorten the flash tube life.
5. Nikon's flash protocols may limit the maximum sync speed of some Nikon
camera bodies.

Compatibility Table

Second Curtain Sync - SCS
The Phottix Indra500 TTL Second Curtain Sync function makes the studio light
fire at the end of an exposure, not the beginning. This helps capture special ef-
fects when using slow shutter speeds.
Please note:
1. SCS function is supported by the Phottix Indra500 TTL Studio Light, but it
cannot be set on the studio light itself. Instead please set the SCS function on
your camera or flash trigger. For more details, please refer to your flash trigger
and camera user manuals.
2. SCS function will not work in Multi Stroboscopic mode.
Test/Ready Button
1. Pressing the test button will trigger the studio light. This can be used for me-
tering in Manual mode.
2. This button also offers a Flash-ready indication function. The LED indicator on
5
INSTRUCTION MANUAL
En
the button will flash green when the light has the minimum recycle charge. It
will flash red when fully charged.