Personnel Qualification - WIKA PG43SA-S Manual De Instrucciones

3. Safety
3.4 Compliance with 3-A conformity
For a 3-A-compliant connection the following sealings have to be
used:
For milk thread fittings per DIN 11851, suitable profile sealings
„
have to be used (e.g. SKS Komponenten BV or Kieselmann
GmbH).
For fittings per IDF sealings with support ring per ISO 2853 have
„
to be used.
Note: Connections per SS, APV RJT and NEUMO Connect S are not
3-A-compliant.
3.5 Compliance with EHEDG conformity
For an EHEDG-compliant connection, sealings in accordance with
the current EHEDG policy document must be used.
Sealings for connections per ISO 2852, DIN 32676 and BS 4825
part 3 are, e.g., manufactured by Combifit International B.V. A
manufacturer of sealings for connections per DIN 11851 is, e.g.,
Kieselmann GmbH. A manufacturer of VARINLNE
GEA Tuchenhagen GmbH. A manufacturer of NEUMO BioConnect
sealings is, e.g., Neumo GmbH & Co. KG.

3.6 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and
damage to property.
▶
The activities described in these operating instruc-
tions may only be carried out by skilled personnel
who have the qualifications described below.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
-sealings is, e.g.,
®
EN
®
9