D-Link DAP-2695 Guia De Instalacion página 4

To power the access point, you can use one of
the following 3 methods:
Method 1 - Use if you have a
Method 2 - Use if you do not
Method 3 - Use if you do not
Method 1
1. Connect one end of your Ethernet cable
into the LAN1 (PoE) port on the DAP-
2695.
2. Connect the other end into one port on a
PoE switch.
Method 2
1. Connect one end of an Ethernet
cable into the Data In port on the
PoE base unit and the other end
into one port on your switch, router,
or computer.
2. Connect one end of an Ethernet
cable into the P+Data Out port on
the PoE base unit and the other
end into the LAN1 (PoE) port on
the DAP-2695 access point.
3. Use the supplied power adapter.
Connect the power adapter to the
Power In receptor on the PoE
adapter.
4. Connect the other end of power
adapter into a power outlet.
4
DAP-2695_A1_QIG_v1.00(EU).indd 4
All manuals and user guides at all-guides.com
PoE switch.
have a PoE switch
and do not have a
power outlet near
the location of the
access point.
have a PoE switch
and have a power
outlet near the
location of the
access point.
D-Link DAP-2695 Quick Install Guide
2013/8/19 下午 02:20:57