Outlet Instructions; Cleaning Instructions - Weston 82-0103-W Manual Del Usuario

All manuals and user guides at all-guides.com

OUTLET INSTRUCTIONS

To reduce the risk of electrical shock, this plug must fit fully
into the outlet. If the blades do not fit into the outlet, try
turning the plug around. If the plug still does not fit into the
outlet, contact a qualified electrician. DO NOT attempt to
modify the plug in any way.

CLEANING INSTRUCTIONS

WARNING! Before cleaning, assembling or disassembling the Grinder, make sure
it is turned "off" and disconnected from the power source. Test to make sure there is
no power to the Grinder by switching the Motor Unit "on" and "off."
Before using the Grinder for the first time, thoroughly clean all parts (including
accessories) as instructed below. DO NOT immerse the Motor Unit in water
or other liquid.
1. Turn the Motor Unit "off" and disconnect it from the electrical outlet.
2. Fully disassemble the attached Head.
3. Loosen the Head Locking Nut on the side of the Motor Unit.
4. Remove the Head from the Motor Unit.
5. DO NOT immerse the Motor Unit in water or other liquid. Clean the Motor
Unit with a damp cloth or towel then wipe dry.
6. Wash all parts that contact food in warm soapy water. Rinse with clean
water. Dry all parts immediately.
NOTE: The Grinder parts and Attachment parts are not dishwasher safe.
7. Lubricate the Grinder Head, Grinding Plates and Knife with a food-grade
silicone spray after each use.
6