Teltonika BAT120 Guia De Inicio Rapido página 3

IN/OUT POWER SOCKET PINOUT
Power / Red wire Ground / Black wire
Passthrough Passthrough
LED INFORMATION
IN PWR LED lights up – PSU connected to IN PWR socket.
OUT PWR LED lights up – OUT PWR socket connected to the device.
POWER LEDs light up – Shows BAT120 state of charge. Every LED is 25% of SOC.
All LEDs blinking every 500 ms – BAT120 overheated.
OUT PWR LED blinking every 500 ms – OUT PWR shorted.
POWER LEDs lighting up in sequence – BAT120 is charging.
POWER LEDs blinks every 5 s – BAT120 is in sleep mode.