Cloer 6789 Instrucciones De Uso página 14

·
Please note: Experiences with grilling on gas
or coal grills cannot absolutely be applied
to grilling with electrical grill appliances as
well!
Our grilling tips
·
For best result, pre-heat the grill for about 5
minutes before cooking.
EN
·
Tender cuts of meat such as filet and sirloin are
ideal for grilling.
·
Marinade tougher cuts of meat to tenderize
them before grilling.
·
Adjust heat setting gradually and only
as necessary. Cooking foods at too high
temperature can cause them to dry out.
·
Better cooking results will be achieved with
boneless cuts of meat, poultry and fish.
·
Avoid turning food regularly. Once food has
been seared on both sides, cook food at a
reduced temperature setting. This prevents the
food from drying out our toughens.
·
The grill bars on the cooking plate allow all
the fat and juices to drain into the drip tray for
healthy and less fat cooking. It is ideal for lamb,
beef, fish, poultry and burgers.
Cleaning
·
Unplug the grill and let it cool before cleaning
and storing away.
·
Wipe all surfaces with a clean damp cloth. Use a
paper towel moistened with a little cooking oil
to remove stubborn stains.
·
Fat and juices developing during cooking are
collected in the removable grease drip tray.
·
Only remove it in the cooled state of the rails
and discard the fat.
·
Wash the drip tray in warm soapy water.
·
Take extra care with the non-stick cooking
surfaces.
·
Do not immerse the grill in water or any other
liquid.
·
Don't use harsh or abrasive cleaning agents or
solvents.
·
Don't use scourers, wire wool, or soap pads.
·
The removable connector plug must not get
in contact with water. Just clean the plug by
means of a humid cloth.
Storage
Your Barbecue Grill 6789 can be disassembled
as follows and stowed away to save space.
14
Place 4 of the 5 feet and the central element into
the grill housing. The grease collection drawer
can remain in the grill housing.
Then place the grease collection tray above it.
In the next step, then the grill plate can again
be inserted into the grill housing.
The tray can now be placed on the grill plate in
the reverse order.