Care And Cleaning; General Cleaning; Routine Cleaning - Hamilton Beach FlexBrew Manual Del Usuario

Care and Cleaning

w WARNING Electrical Shock Hazard.
Do not immerse cord, plug, or coffee maker in any liquid
Cut Hazard.
w CAUTION
Removable single-serve capsule holder has a sharp needle Piercing
needle on underside of lid also is sharp Use caution when handling

General Cleaning

1. Unplug and allow to cool
2. Hand-wash all removable parts in hot, soapy water Rinse and dry
or wash in TOP RACK only of dishwasher DO NOT use "SANI"
setting when washing in dishwasher "SANI" cycle temperatures
could damage your product
3. Wipe outside of coffee maker with a soft damp cloth

Routine Cleaning

All coffee makers should be cleaned at least once a month (once a
week for areas with hard water)
1. Plug into outlet
2. Pour 3/4 cup (177 mL) of plain white vinegar and 3/4 cup (177 mL)
of cold water into reservoir
3. Place a 14-oz (414-mL) or larger cup or travel mug underneath to
catch water/vinegar solution Press ( ) Brew Regular or ( )
Brew Bold Button once When solution starts dispensing, press
Brew Regular or ( ) Brew Bold Button again to stop brewing and
allow vinegar to clean After 30 minutes, press ( ) Brew Regular
or ( ) Brew Bold Button and allow it to finish brew cycle When
brew cycle is finished, empty cup and rinse Run 2 to 3 cycles of
cold tap water The unit is cleaned and ready to brew coffee
4. Unplug
6
Clogged Needle
1. Unplug and allow to cool
2. Remove gray removable needle holder
in lid by turning arrow from locked icon
( ) to the unlocked icon ( )
3. Bend a small paper clip Insert tip of
paper clip through hole of the piercing
needle and up into shaft of piercing
needle to ensure grounds have been
removed
4. To replace gray removable needle
holder, insert tab between lock icon ( )
and unlock icon ( ) and turn to right to
lock
2