Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Position one tool on the back side of the blade and slightly tilt it with the blade
exerting a bit of resistance.
4.
Use the other tool to strike against the tilted tool above the mixing chamber to
loosen the blade.
5.
After loosening the blade, carefully remove it by turning it and insert the new
blade.
6.
Carefully tighten the new blade by hand. Start a manual cleaning program
using the "Cleaning" button. The blade fastens itself during the first uses.
Trouble shooting
The device indicated problems using a signal beep and via the display.
1. There is no glass har
2. The water container is empty
3. The lid is open or not properly closed
4. The collection container must be emptied
Publicidad
