Safety Instructions; Instructions For Safe Operation - Simon, Evers & Co K 522 823 Instrucciones De Manejo Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58

Safety instructions

IMPORTANT:
The instructions and safety instructions in this operating manual must be followed to the letter.
Failure to follow them or incorrect operation or abuse may result in danger.
for the operator or third parties
- for the unit and other property of the operator
The unit may only be operated and serviced by persons
- who are trained to do so
- who have read and understood this operating manual
- who are acquainted with the safety regulations governing their work station
- who have a suitable work station and tools
I. Instructions for safe operation
Please refer to all the warning symbols and notes in this description and on the unit before you
commission it.
1. PEOPLE OTHER THAN THE OPERATOR MUST KEEP A SAFE DISTANCE FROM THE
UNIT WHILST IT IS OPERATING.
2. ONLY PEOPLE ACQUAINTED WITH THE UNIT SHOULD BE ALLOWED TO OPERATE IT.
3. DO NOT COMMISSION THE UNIT UNTIL YOU ARE CONVINCED THAT IT IS PERFECT
CONDITION. PAY SPECIAL ATTENTION TO THE CONDITION OF THE WHEELS, THE
LEVER DEVICE, THE PLATFORM AND THE RAISING AND LOWERING CONTROL.
4. NEVER USE THE UNIT ON SLOPES.
5. ENSURE THAT PARTS OF THE BODY BECOME CAUGHT IN THE LIFTING MECHANISM,
UNDER THE PLATFORM OR UNDER THE LOAD. NEVER TRANSPORT PEOPLE ON THE
UNIT.
6. THE OPERATOR SHOULD WEAR GLOVES AND SAFETY SHOES FOR HIS OR HER OWN
SAFETY.
7. NEVER TRANSPORT UNSTABLE OR LOOSELY STACKED OBJECTS.
8. NEVER OVERLOAD THE UNIT.
9. NEVER LOAD THE PLATFORM ON ONE SIDE OR MAKE IT TOP-HEAVY OR PLACE
LOADS THAT STICK OUT OVER THE EDGE OF THE PLATFORM.
10. THE CAPACITY OF THE UNIT ASSUMES THAT THE LOAD WILL BE PERFECTLY
BALANCED FOR TRANSPORT WITH THE CENTRE OF GRAVITY IN THE CENTRE OF THE
FORKS AT THE FRONT.
11. ENSURE THAT THE LENGTH OF THE PLATFORM IS THE SAME AS THE LENGTH OF THE
PALLET.
12. LOWER THE PLATFORM AS FAR AS POSSIBLE WHEN THE UNIT IS NOT IN USE.
13. HIGH VOLTAGE! DISCONNECT BATTERY SOCKET BEFORE OPENING CONTROL PANEL
BOX.
14. DO NOT REMOVE BATTERY TERMINAL COVER. SHORT-CIRCUIT OR ELECTRIC SHOCK
COULD OCCUR.
Operating manual
* * * * *
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K 522 827K 522 831G 943 649G 943 650G 943 651

Tabla de contenido