Tractel 066968 Manual De Empleo Y De Mantenimiento página 17

All posts with a height of 500mm or less are equipped with a 10mm thick plate (Fig. 2, item 3). Posts over 500mm high are equipped
with a 15mm thick plate.
All galvanised posts are fitted with a 70 x 70 square tube (fig. 2, item 2). All stainless steel posts are fitted with an 80 x 80 square tube
(fig. 2, item 2).
Dimensional characteristics of post equipment and fixings for installation and use are compliant with BS EN 795-A/2012 and for two
people compliant with TS 16415-A/2013.
Post type Reference
066968
438900
A
438890
072338
072058
072038
B 438920
438910
072348
072068
072048
C
438940
438930
072328
D
072318
AG: Galvanised steel.
AI: Stainless steel (AISI 316L).
Nf min: Minimum number of fixings.
Rf min: Nominal minimum resistance per fixing.
Min Ø: Minimum diameter of fixings.
(*) Fasteners placed in the 4 holes of the plate labelled A in Figure 1 or 4 holes of the plate labelled B in Figure 1.
TABLE 1
H
Type
(mm)
500 AG
500 AI
250 AI
750 AG
500 AG
250 AG
500 AI
250 AI
750 AG
500 AG
250 AG
500 AI
250 AI
500 AG
250 AG
Plate dimension (mm)
r a b c
7 196 106 64
6.5 201 110 64
6.5 201 110 64
9 196 154 30
6.5 201 110 64
6.5 201 110 64
Fixing
Nf min Rf min Ø min
e
() (daN) (mm)
10 4 785 Ø 10
10 4 785 Ø 10
10 4 785 Ø 10
15 4 1185 Ø 12
4(*) 785 Ø 10
10
8 785 Ø 10
10 4(*) 785 Ø 10
4(*) 785 Ø 10
10
8 785 Ø 10
10 4(*) 785 Ø 10
4(*) 1185 Ø 12
15
8 785 Ø 10
4(*) 785 Ø 10
10
8 785 Ø 10
4(*) 785 Ø 10
10
8 785 Ø 10
4(*) 785 Ø 10
10
8 785 Ø 10
4(*) 785 Ø 10
10
8 785 Ø 10
10 4 785 Ø 10
10 4 785 Ø 10
GB
17 17