Knape & Vogt PSW-HANDLE9 Guia De Inicio Rapido

Product Assemblies
PSW-HANDLE9
PSW-HANDLE12
PSW-HANDLE15
Parts Included
A. Handle (1)
B. Screw Pack
(4 - #10-24 x 1" Phillips
pan-head machine screws)
C. Mounting Clips (4)
A B
C
Tools Required
• Phillips Head Screwdriver
Product Assemblies
PSW-HANDLE10
Parts Included
A. Handle (1)
B. Screw Pack
(4 - #10-24 x 1" Phillips
pan-head machine screws)
C. Mounting Clips (2)
A B
C
Tools Required
• Phillips Head Screwdriver
2700 Oak Industrial Drive NE , Grand Rapids, MI 49505 USA
800.253.1561 • 616.459.3311 • www.kv.com
HANDLE KIT
Installation Instructions
Inspect all parts and read all instructions prior to
beginning assembly and installation.
Follow these steps for PSW-HANDLE9, PSW-HANDLE12 and
PSW-HANDLE15 product assemblies.
Place 2 mounting clips onto each side of handle, as shown (A).
1
Extend the slide members of the waste bin product assembly out of the cabinet
2
interior to a comfortable working position. Select a side to begin assembly. Position
the handle on the inside of the slide member, aligning the holes (A). Attach the
handle to the slide member using the #10-24 x 1" screws provided. Tighten screws to
secure handle in place. Repeat the process attaching the handle to the opposite
side slide member. Installation is now complete. Installed handle should look like
figure B.
A
Follow these steps for PSW-HANDLE10 product assemblies.
Place 1 mounting clips onto each side of handle, as shown (A).
1
Extend the slide members of the waste bin product assembly out of the cabinet
2
interior to a comfortable working position. Select a side to begin assembly. Position
the handle on the inside of the slide member, aligning the holes (A). Attach the
handle to the slide member using the #10-24 x 1" screws provided. Tighten screws to
secure handle in place. Repeat the process attaching the handle to the opposite
side slide member. Installation is now complete. Installed handle should look like
figure B.
A
©2009Knape & Vogt. All rights reserved. Knape & Vogt
B
B
reserves the right to change specifi cations without notice. Made in USA.
®
310171-101509