Maintenance And Care - KIKKA BOO EAT'N PLAY Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
Congratulations on your purchase. To ensure maximum protection and optimum comfort for your child, it is essential that you read through the entire manual
carefully and follow all instructions. Read these instructions carefully before assembly and use and keep for future reference. The child may be hurt if you do not
follow these instructions.
WARNINGS
• This product is NOT aplicable to baby who can not sit unaided.
• The highchair is suitable for children who are able to sit up unaided( approximately 7 months-36 months).
• It's not intended for children weighing more than 25kgs.
• Do not use the highchair unless all components are correctly tted and adjusted.
• Do not leave your child unattended, even for a short time.
• To prevent serious injury or death from falls or sliding out, ensure the harness is correctly tted and the child is secure in the restraint.
• Avoid placing the highchair near naked heat sources such as electric bar res, gas res,etc. or where a child could gain access to any other kind of hazard.
• Ensure all users are familiar with the product operation. It should always open and fold easy. If it does not, do not force the mechanism-stop and read the
instructions.
• Only use on a at and stable surface.
• Ensure highchair is fully erected before placing your child inside.
• Ensure children are away from all moving parts before making any adjustments. Do not move highchair while your child is inside.
• Do not allow your child to climb unassisted into, play with or hang onto your highchair. This is not a toy.
• All additional hazards such as electrical re ex should be kept out of reach from the child in the highchair.
• Do not to use the seat if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
• The restraint system shall be removed/hidden/covered (as applicable) when the product is used as a seat
• If this product is located under a window, it can be used as a step by the child and cause the child to fall out from the window.
• Be aware of the risk of open res and other sources of strong heat in the vicinity of the product.
• DO NOT place this product near a window where cords from blinds or curtains may strangle a child.
• Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
I. PARTS LIST P1 .Seat unit 2. Seat base 3.Table 4. Game table 5.Serving tray 6.Safety stop 7.Upper Leg 8.Lower Leg
Check that you have all the parts for this model BEFORE assembling your product. No tools required.
II. ASSEMBLY - SMALL DINNER CHAIR MODE
1. Take the seat unit,Insert in to the base,and hear for a "clack" to make sure it is in place.
2. Insert the upper legs into the seat base,and hear for a "clack" to make sure it is in place.
III. ASSEMBLY - HIGH CHAIR MODE
3. Fix the Safety stop to the serving tray. Position the tray to the front of the arms. The tray has three positions as indicated on the arm rests.
4. Insert the Lower legs into the table and hear for a "clack" to make sure it is in place.
5. Insert the upper chair into the table and hear for a "clack" to make sure it is in place.High chair complete.
IV. ASSEMBLY - STUDY DESK AND CHAIR / GAME TABLE MODES
6. Press the button to pull out the upper leg to separate the upper chair from the table
7. Push the button to release the tray. Remove the seat belt and turn it into a learning table set.
8. Transform the upper tray into a game table!
V. ASSEMBLY - STOOL / BOOSTER MODES
9. Separate the upper chair to be used as a small stool
10. Put the upper seat unit on a chair and tie it tightly into the booster mode.
Multifunction highchair could be used as a study desk and chair as well as stool and booster, which could be used for children from 7 months-10 years old.

MAINTENANCE AND CARE

• Check regularly the frame for signs of damage or wear.
• Clean the plastic parts with a damp cloth.
• Clean the seat by sponging with warm soapy water and a mild detergent.
• Dry the metal parts to prevent the formation of rust.
• Prolonged exposure to direct sunlight may cause the fabric to fade.
Main materials constituting the product:PP+Polyester
This product applies with: EN 14988 / EN 17191
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido