Publicidad
Idiomas disponibles
Idiomas disponibles
11. Press
again to confirm and finish the sunset setting.
Note: if there is no operation for 10 seconds in alarm setting mode, it will exit automatically without saving
When sunset mode is active:
1. Press
or
off at selected time.
2. Long press
to turn off both the light and/or sound directly.
3. Long press
for 5 seconds will turn on/off the wifi function.
BEDSIDE LIGHT
Your alarm clock can be used as a dimmable or coloured bedside light.
1. Press
to turn on white light.
2. Use
or
3. Press
a second time to enable the color changing mode.
Use
or
4. Long press
or
level 10).
5. Press
a third time to turn off the light.
RADIO
When using the radio function for the first time, it must scan for available radio stations on the frequency range
87.5-108MHz.
1. Press
to turn on/off radio.
2. Long press
for 3 seconds to start auto scanning for available stations.
When a station is found and you would like to keep it as a preset station, press
the station. (presets will be stored incremental from 1 up to 20). The radio will then continue with the auto-scan
after 5 seconds of no operation.
3. When the scan is finished you can long press
4. Short press
or
5. Use
or
to set the desired volume (00 up to level 15)
/
or
would stop brightness/sound changing and fix at your adjust level and then get
to adjust the white light brightness level up to 30 (Default is level 10).
to select your favorite color from green, red, blue, pink, orange, light blue.
to adjust the brightness level of the current selected color. Max level is 30 (Default is
to fine tune a station (one step is 0.1MHz).
or
to select one of the saved preset stations.
19
within 5 seconds to save
Publicidad
