Home Decorators Collection BRUNFIELD BUGVT6122 Guía De Uso Y Mantenimiento página 5

Assembly (continued)
5
Securing the vanity
CAUTION: Do not over tighten the screws as this
could bend the wall bracket.
□
Punch the 8 long screws (CC) through the back panel of
the vanity (A) and screw them into the support board.
CC
A
7
Adhering the basins
□ Apply a layer of silicone on the underside of the vanity (A) top
along each basin (B) cutout, where the basins (B) will be in contact.
□
Lower each basin (B) onto the top, lining it up with the cutout.
□
Wipe away any excess silicone.
CC
6
Installing the shelves
□ Insert four shelf pins (DD) into the four pre-drilled holes at the
desired height inside each vanity (A) compartment.
□
Slide each shelf (C) into each compartment above the pins (DD).
A
B
A
5
Please contact 1-800-986-3460 for further assistance.
C
B
HOMEDEPOT.COM/HomeDecorators
C
DD