Product Installation; Before Installation - brondell MBH-10 Manual De Instrucciones

PRODUCT INSTALLATION

Before Installation

You must have a CleanSpa hand-held bidet or
equivalent product with a ½" connection sprayer hose
in order to install the Hand-Held Bidet Holster with
Integrated Shut Off.
IMPORTANT
Cold Water Supply
Please be advised that the provided cold water T-valve
should be installed at the fill valve under the toilet tank,
INCORRECT
NOT at the cold water supply coming from the wall.
Check Water Supply Line
If the pipe that connects the toilet tank fill valve to the
water shutoff valve at the wall is rigid, you will need
to purchase a flexible water supply hose to replace
it before installing the Hand-Held Bidet Holster with
Fill Valve
Integrated Shut Off. The length of the hose may vary
and the top connection size should be ⅞" ballcock to
connect to the T-valve that you will install under the
CORRECT
toilet tank and the bottom connection will vary (most
common are ⅜" and ½" female compression).
4