Samsung 650 Serie Manual Del Usuario página 24

Advanced Features
Network Setup (Samsung Auto Configuration)
This function is available in APs (Access Points) that support
Samsung Auto Configuration. If there is no such AP, you can
connect through PBC (WPS) or manually.
✎
This function is available when
Link) set to Off.
✎
You can check for equipment that supports Samsung
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them on.
✎
Because the booting times of applications differ, you
may have to wait for approximately 2 minutes.
✎
If the LAN cable connected the WAN port of AP
during Samsung Auto Configuration, you are able to
complete until Internet connection test. If you do not
connect, Samsung Auto configuration will check only
device connecting of AP (Not check Internet).
2. After 2 minutes, connect the Samsung Wireless LAN Adapter
to the TV. When the Samsung Wireless LAN Adapter is
established, the pop-up window appears.
3. As soon as a connection is established, place the AP in
parallel with the Samsung Wireless LAN Adapter giving a gap
no larger than 25cm.
4. Wait until the connection is automatically established.
✎
If the connection fails, reset the AP and then try again.
✎
If Samsung Auto Configuration does not connect your
TV to your AP, a pop-up window appears on the
screen notifying you of the failure. Reset the AP, and
then try again. If the connection fails again, choose
one of the other connection setup methods, PBC
(WPS), auto, or manual.
After the connection is established, locate the sharer at the
5.
desired location.
✎
If the AP settings have been changed or it is the first
time you use the new AP after purchase, you need to
set up again beginning from Step 1.
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the previous
section.
2. Turn on your TV, press the
use the ▲or▼ button to select Setup, and then press the
ENTERE button.
Use the ▲or▼ button to select Network in the Setup
3.
menu, and then press the ENTERE button.
4. On the Network screen, select Network Type.
Set Network Type to Wireless.
5.
24
English
SWL (Samsung Wireless
MENU button on your remote,
6. Select Network Setup. The Network Setup screen appears.
Network Setup
Select a network
Internet Protocol Setup
IP Address
Subnet Mask
Gateway
DNS
DNS Server
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within two
minutes. Your TV player automatically acquires all the network
setting values it needs and connects to your network.
9. After the network connection is set up, press the
button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system that
requires devices that access the network to transmit an encrypted
security code called an Access or Security Key. The Security Key
is based on a Pass Phrase, typically a word or a series of letters
and numbers of a specified length you were asked to enter when
you set up security for your wireless network. If you use this
method of setting up the network connection, and have a Security
Key for your wireless network, you will have to enter the Pass
Phrase during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these steps:
1. Follow Steps 1 through 6 in the "How to set up using PBC
(WPS)" above.
2. Press the ▼ button to select Internet Protocol Setup, and
then press the ENTERE button. Press the ▲ or ▼ button
to select Auto, and then press the ENTERE button.
: Not Selected ►
: Auto
:
:
:
: Auto
:
RETURN